Back to CD

.pdf File

Back to WELCOME Page

CIO-DAS08, CIO-DAS08PGH and CIO-DAS08PGL from $199
Low Cost Mutifunction Medium Speed Boards for IBM Compatibles

• 8 Channels of Analog Input

• Software Programmable Ranges (CIO-DAS08-PGH/PGL Only)

• Up to 31 Digital I/O Lines (for CIO-DAS08. Others have 7)

• Labview Support

The analog signals are brought on board by a standard 37-pin, D-type connector directly to an analog multiplexer, which provides eight channels of input and is protected against 30V max. The CIO-DAS08's input channels are single-ended. The CIO-DAS08- PGH/PGL's input channels may be single-ended or differential. The 12-bit A/D converter provides a resolution of 1/4095 parts of full scale. Speeds of up to 20,000 samples per second are possible.

The input ranges of the CIO-DAS08 of +/-5V, +/-10V and 0-10V are selected by dip switches on the board. The programmable amplifier of the CIO-DAS08-PGH/PGL allows the input ranges of these boards to be controlled the PC software. The gains of the CIO-DAS08-PGH are 0.5, 1,5,10,50,100,500,1000 in both unipolar and bipolar ranges. The gains of the PGL are 0.5, 1, 2, 4 and 8 in unipolar bipolar ranges.

Three digital input and four digital output lines are accessible from the boards' main 37-pin connector. Through an auxiliary 37-pin connector, the CIO-DAS08 adds 24 more lines of digital I/O that are programmable as inputs or outputs in groups of eight. These additional I/O lines, which use an industry standard 8355 chip, require a separate terminal panel and cable. The number of CIO-DAS08 or CIO-DAS08- PGH/PGL analog inputs can be expanded from eight up to 128 in increments of 16 or 32. The CIO-EXP series expansion multiplexer boards provide gains of up to 800, thermocouple cold junction compensation and 12-22 AWG screw terminals all on one 16" x 4" accessory board (CIO-EXP32; CIO-EXP16 measures 9" x 4"). Optional software drivers are available for users writing their own programs.

The UNIV-DRVR universal library package provides support for both DOS, Windows and Windows 95 programming languages. Both 16 bit and 32 bit drivers can be used. DOS support includes QUICKBASIC 4.5, Visual Basic, Turbo C, Borland C/C++, microsoft C and Quick C. Windows support includes Microsoft C, Visual C++, Visual Basic, Borland C, C++ and Delphi. Labview Drivers are also available.

Copy (to your hard drive) Instacal setup software for DOS and Windows 3.1 now!

Copy (to your hard drive) Instacal setup software (32-bit) now!

View an Adobe Acrobat pdf file for more product info (requires Acrobat Reader).

U.S.A. and Canada International Callers; Sales and Service; 203.359.1660

Please E-Mail any comments or suggestions to OMEGA®. ® Copyright 1999 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED